This method produces a ripple like effect on a raster image.
Parameters
amplitude
Sets the amplitude or height of the ripples. As
this value increases the ripples become higher
waveLength
Sets the wavelength or distance from the crest of
one wave to the crest of the next wave. As this value increases
there are few ripples produced
phase
Sets the phase or shift in the wave cycle
backColor
Sets whether empty spaces are filled with color
from adjacent pixels or from the color set as a background color
[False: spaces filled with background color, True:spaces filled
with the color of the adjacent pixels]
reflect
Causes a reflective effect from one ripple to the
next (Best used with small amplitudes) [False:No reflection, True:
reflection]
red
The red component of the background color (from 0
to 255)
green
The green component of the background color (from
0 to 255)
blue
The blue component of the background color (from
0 to 255)
Return Value
Returns True if successful. Returns False if unsuccessful.
Explanation
The Ripple method produces a ripple like effect on a raster image.
To execute the Ripple method, set the image handle of the image in the Image property or the Layer(LayerNumber).Image property. The Ripple method supports 8 bit grayscale, 16, 24, and 32 bit images.
Before executing the Ripple method, you must set the area on the image that will be affected. There are 4 ways to do this.
- To use a mask image, set the SelectMode property to EffectMask. Set the mask image handle in the SourceMask property
- To process the total image, set the SelectMode property to EffectAll
- To process the polygonal area on the image, set the SelectMode property to EffectPolygon. Select the polygon by setting the appropriate coordinate values for the points of the polygon in the Point property
- To process an elliptical area on the image, set the SelectMode property to EffectEllipse. Select the ellipse by setting the appropriate values for the bounding rectangle in the Rect property
When the SelectMode property is set to EffectPolygon or EffectEllipse, the appropriate values must be set in the Inside property.
If the Ripple method is successful and the DestinationAsImageKitImage property is True, the resulting image will be set in the Image property or in the Layer(LayerNumber).Image property, according to the value set in the LayerNumber property.
If the Ripple method is successful and the DestinationAsImageKitImage property is False, the resulting image will be set in the DestinationImage property.