Public Properties

 AdjustGamma Sets the Gamma coefficient.
 AutoBright Sets whether or not automatic brightness is enabled.
 BitDepth Sets the number of bits per pixel in the scanned image
 BitDepthReduction Sets the method used to reduce the bit depth when scanning in 1 bit color
 Border Removes the black borders, formed during scanning or copying, from around the images
 BorderColor Sets the color used during border correction
 BorderDetection Enables automatic border detection
 Brightness Sets the scan brightness
 ColorBWRatio Sets the allowable ratio of color pixels in a document for the scanner to scan in black and white
 Compression Sets the compression method used when an image is transferred via memory
 ContainerType Retrieves the TWAIN container type for the specified capability
 Contrast Sets the scan contrast
 Count Retrieves the number of scanned images
 CurrentIndex Retrieves the index of the current value
 DataSourceName Sets the name of the scan device
 DefaultIndex Retrieves the index of the default value
 Deskew Sets whether or not deskew is enabled
 DllFileName Sets the TWAIN Dll filename
 DropoutColor Sets the dropout color
 DynamicThreshold Sets the dynamic threshold level
 ExtendedUserInterface Sets whether or not the extended user interface is used
 FileFormat Sets the file format when saving a file using file transfer.
 FileName Sets the file name when saving a file using file transfer or using memory transfer with compression
 FocusPosition Sets the focus position of the scan
 Gamma Sets the gamma correction
 Halftone Sets the halftone
 Highlight Sets the scanning highlight
 IgnoreBackColor Sets whether or not the background color of the document is ignored when automatically determining whether to scan in black and white or in color
 ImageFilter Sets the image filter
 ImageMerge Sets the double sided merge mode
 Indicator Sets whether or not the indicator is displayed when scanning
 InformationFileName Sets the information file where the scan settings, set in the scan manufacturer's scan driver interface, are saved
 JpegQuality Sets the JpegQuality when using file or memory transfer with JPEG compression.
 Mode Sets the scanning mode
 MoireFilter Sets the level for the Moire filter
 NoiseFilter Sets the noise reduction filter
 Orientation Sets the orientation of the paper
 Overscan Enables "over scan" capabilities enlarging the scan area
 PageCount Sets the number of images to be scanned
 PaperSize Sets the size of the paper
 PixelType Sets the type of image scanned
 Rect Sets the scanning position
 RemoveHole Sets hole removal
 RotateBack Sets whether or not the back side of the page is rotated when scanning on both sides using an ADF
 Rotation Sets the rotation angle for the scanned image
 ScanningSpeed Increases the speed at which a document is scanned
 Shadow Sets the shadow
 Sharpness Sets the level of sharpness
 SkipBlankPage Sets whether or not a blank page will be skipped
 SkipBlankThreshold Sets the threshold value to determine if a blank page is included with pages to be scanned and whether that blank page will be skipped
 TextEnhancement Sets the type of text enhancement used
 Threshold Sets the scanning threshold
 Transfer Sets whether native, file, or memory transfer is used
 Unit Sets the units of measurement
 UserInterface Sets whether the scan driver's user interface is used or if a custom built user interface is used.
 Value Retrieves the value supported for the specified capability
 XResolution Sets the horizontal scan resolution
 XScaling Sets the horizontal scaling (magnification)
 YResolution Sets the vertical scan resolution
 YScaling Sets the vertical scaling (magnification)

Public Methods

 ClearProperty Resets the scan control properties
 CloseDataSource Closes the scan device
 Execute Retrieves an image from a TWAIN scan device
 GetBitDepth Retrieves the bit depth supported by the scan device
 GetCapabilityEnumToSingle Retrieves the possible setting values for a specified property of the scan device
 GetCapabilityEnumToString Retrieves the possible setting values for a specified property of the scan device
 GetCapabilityRange Retrieves the range of possible setting values for a specified functionality of the scan device
 GetCurrentDataSource Retrieves information about the scan device currently being selected
 GetDataSources Retrieves information about the specified scan device
 GetMinimumSize Retrieves the smallest size that can be scanned with a given scan device
 GetPhysicalSize Retrieves the largest physical size that can be scanned with a given scan device
 Initialize Starts the TWAIN process
 IsCapabilitySupported Confirms whether or not a functionality is supported by the scan device
 IsOpenDataSource Checks whether or not the scan device is open
 OpenDataSource Opens the scan device
 SelectDataSource Selects the scan device
 Terminate Ends the TWAIN process

See Also

Newtone.ImageKit.Win.ImageKit

 

The ImageKit.NET3 is created by Newtone Corporation